 |
| Young man on the Edvard Petrini's pedaled roller skates known as Takypod in Sweden, circa 1910 |
In recent history, creative innovators have advanced the design, performance, and functionality of roller skates. Many of these changes involved using new materials, tweaking angles, or shifting the placement of different components; however, the mechanics pretty much stayed the same...until the Arius plate was created.
To PowerDyne's credit, Arius Red plates really were quite impressive. They were unbelievably light, could take a beating, and performed well, but the most surprising aspect of these plates was the absence of a kingpin!
 |
| PowerDyne Arius Red Plates |
 |
| Arius Red Butterfly Cushions |
The first was that the original toe stop screw was difficult to tighten enough to firmly hold a toe stop. PowerDyne ended up coming out with a new toe stop screw that helped with this issue, but you still had to tighten it down hard to get the toe stop to stay put. The second frustrating design was that the cushions were held in place by tiny screws, 1 on each side of the cushion which meant 4 tiny screws per plate, 8 total for the pair. These screws were a pain to remove/install and were easily lost.
Apparently PowerDyne listened to their customers because, in 2016, they introduced the Arius Platinum plate. This version featured the same innovations as the original Arius model, but also included a couple upgrades making them not only perform better, but easier to work with. You can see in the pic below that the toe stop screw is now located toward the front of the plate instead of behind the toe stop, the new design makes securing the stop much easier.
PowerDyne also redesigned the trucks and cushions, eliminating those 8 tiny screws altogether (yay!). Unfortunately, the new Split Butterfly Cushions are not compatible with the old plates and vice versa, but it's a small price to pay for making the cushions so much easier to replace/swap out.
A couple months ago, I ordered myself some Arius Platinum plates mounted on the new Solaris boots (my next article will cover Solaris boots). The first time I tried the new setup, I encountered ran an issue that I wasn't expecting... I couldn't control my feet! I felt like my skates were moving in and out on their own and I didn't feel comfortable lifting my wheels off the ground to do a simple crossover. I must say, I freaked out quite a bit on the inside but tried to remain calm. I changed out the cushions out for harder ones, which seemed to help somewhat but I could tell something else was wrong. After trying the new skates out twice without much improvement, I grabbed my old skates to compare my plates...the axles on the Arius plates were spaced an inch further apart than my old Venus plates! According to the Arius plate size chart, I should need a size 8 plate for my size 8.5 boots and that is the size Riedell mounted on my boots before sending them to me. I ended up removing the size 8 plates and mounted size 6 instead, which only had about a quarter inch larger axle distance. The next time I tried them out I was able to skate like I had with my old setup, the difference was like night and day. I'd definitely recommend comparing the wheel distance of the Arius plates with whatever you are currently skating on to see if you may need a size other than what is suggested.
 |
| Arius Platinum Plate |
 | |
|
PowerDyne also redesigned the trucks and cushions, eliminating those 8 tiny screws altogether (yay!). Unfortunately, the new Split Butterfly Cushions are not compatible with the old plates and vice versa, but it's a small price to pay for making the cushions so much easier to replace/swap out.
A couple months ago, I ordered myself some Arius Platinum plates mounted on the new Solaris boots (my next article will cover Solaris boots). The first time I tried the new setup, I encountered ran an issue that I wasn't expecting... I couldn't control my feet! I felt like my skates were moving in and out on their own and I didn't feel comfortable lifting my wheels off the ground to do a simple crossover. I must say, I freaked out quite a bit on the inside but tried to remain calm. I changed out the cushions out for harder ones, which seemed to help somewhat but I could tell something else was wrong. After trying the new skates out twice without much improvement, I grabbed my old skates to compare my plates...the axles on the Arius plates were spaced an inch further apart than my old Venus plates! According to the Arius plate size chart, I should need a size 8 plate for my size 8.5 boots and that is the size Riedell mounted on my boots before sending them to me. I ended up removing the size 8 plates and mounted size 6 instead, which only had about a quarter inch larger axle distance. The next time I tried them out I was able to skate like I had with my old setup, the difference was like night and day. I'd definitely recommend comparing the wheel distance of the Arius plates with whatever you are currently skating on to see if you may need a size other than what is suggested.
Now that I've been able to skate with the correct size Arius Platinum plates for a few weeks, I can say I really do like them. They feel different than plates with kingpins...I feel more stable yet jukey/agile at the same time. I haven't had any issues with my toe stops, the screws tighten as expected and don't loosen on their own. Playing around with the different hardnesses of cushions has been interesting, the plates come with 4 sets of cushions so you shouldn't need to purchase separate cushions right away. PowerDyne offers 9 different cushion hardnesses for the new plates which means it's likely there is a combination for any skater out there.
 |
| Custom Solaris Boots with Arius Platinum Plates (Pic courtesy of Jules Hannah) |
If you end up purchasing the Arius Platinum plates, they could very well be the last set of plates you ever need to buy, which isn't a bad investment.
As always, feel free to send comments/questions/feedback to me at 2N1SkateShoppe@gmail.com.
Until We Skate Again,
Shocker
